Tips for layout of buildings

The primary stage of starting the construction of any building is the making of its layout. It’s one of the most sensitive stage of a building and should be done with a proper care.
Steps of making a layout :
There are two methods :

  • Digital
  • Manual

MANUAL CAN BE DONE BY FOLLOWING STEPS :

  • First of all check plot size, is it correct as per given in drawing.
  • Approval – Check either building is designed as per approved/sanctioned map as per guideline of local authority.
  • Now, assume any one wall as a baseline and do right angle overall footprint of building in same level.
manual bulding layout step1
Figure A

As given in the figure ‘A’, Firstly locate any 8 point on guide pillar for checking right angle, but keep in mind all the eight points should be in  same level as given in the figure ‘B’

manual building layout step 2
Figure B
  • When done, all footprint/overall size is right angle and leveled then mark other center line of the wall and column in between these guide pillar and create all the remaining guide pillar.
  • Then mark all the column footing size from given center line point at right angle by line on ground.

Once these steps are done, you can start further excavation work.

     Stay connected for the tips of further steps in the construction of a building.
        Comment for any kind of queries, we would surely respond to it.